Hanging Instructions

Garden Supply Hanging Instructions

Hanging Natures Distributing Stacking Planters

    • You will require a Stacking Planter™ Chain Pack which includes one length of chain with a swivel, heavy-duty slip ring and one chain locking disc.
    • Place one grid into each layer of pots, stack pots one on top of the other, turning each layer 120 degrees so that the bottom pot rests in the grooved area of the top pot. (Fig. 1)
    • Beginning with the top layer, drop the chain through all pots you wish to hang.
    • Under the bottom pot, slide the chain into the chain locking disc at least one link above its lowest point.
    • Pull chain up so that the disc rests in the notched area on the bottom of the pot. (Fig. 2)
    • Hold the chain tight against the top pot to keep pots together while installing tray. (Fig. 3)

Garden Supply Hanging Instructions

    • Proceed to attach the drip tray by engaging the lugs and turning to lock into position. To remove the tray, rotate tray counter-clockwise to release locking mechanism from bottom planter.
    • After installing a strong hook into a suitable location (e.g., rafter or beam), your stacking planters are ready to hang.

Note: Stacking Planters with soil and water can weigh up to 40 lbs. Ensure hook is adequate.

  • Fill each layer with soil, plant choice of seeds, bulbs, annuals, cacti, indoor arrangements, etc. Tend to plants per your individual plants’ requirements.

Note: Stacking Planters with soil and water can weigh up to 40 lbs. Ensure hook is adequate.

Fill each layer with soil, plant choice of seeds, bulbs, annuals, cacti, indoor arrangements, etc. Tend to plants per your individual plants’ requirements.